19
Easy Start
Adjust the projector angle:
• Shift the lens horizontally and vertically.
1
Press
H&V SHIFT
on the remote control.
2
Press
P
,
R
,
O
or
Q
on the remote control.
• Adjust the projector angle by rotating the
adjustment feet.
4. Adjust the angle
B
PP. 29, 30
1
Press
FOCUS
+/– on the remote control to adjust the focus.
2
Press
ZOOM
+/– on the remote control to adjust the zoom.
5. Adjust the focus and the zoom
B
P. 30
1
Press
KEYSTONE
on the projector or on the remote control.
2
Press
ENTER
on the projector or on the remote control.
3
Press
P
,
R
,
O
or
Q
to move the position for the upper left of the image.
4
Press
ENTER
to set the position.
5
Repeat the same procedure with the positions for the upper right, lower right and lower
left of the image.
• When the position of the lower left is set, the correction is
made and the display disappears.
6. Correcting the image distortion due to the projection angle
B
P. 31
On the projector:
Press
INPUT
R
/
P
to display the INPUT list. Use
INPUT
R
/
P
to select the input mode.
INPUT list
INPUT
HDMI1
HDMI2
COMPONENT
COMPUTER
HDMI1
YPbPr
1080P
On-screen display (HDMI1)
On the remote control:
Press
HDMI 1/2, COMPONENT
or
COMPUTER
to
select the input mode.
7. Select the Input mode
B
P. 35
Press
STANDBY/ON
on the projector or
STANDBY
on the remote control, and then press
the button again while the confi rmation message is displayed to put the projector into
Standby mode.
8. Turn the power off
B
P. 28
On-screen display
On the
projector
On the remote
control
Содержание XV-Z30000 Operation
Страница 92: ......
