Sharp XV-Z30000 Operation, Руководство по эксплуатации

Страница: 48 / 92

46
7
Custom Gamma
The Custom Gamma function can be used
when “Picture Mode” is set to “User1” or
“User2”.
You can adjust the gamma curve and save
your custom setting. Adjust it to suit the
picture brightness.
1
Press
P
/
R
to select “Custom
Gamma” on the gamma
adjustment screen, and then
press
Q
.
Custom Gamma
Custom Gamma
Custom Gamma Edit
Off
SEL./ADJ.
RETURN
Return
ENTER
END
Reset
2
Press
P
/
R
to select “On”.
3
Press
R
to select “Custom
Gamma Edit”, and then press
ENTER .
4
Adjust the curve to adjust the
image brightness.
Press
O
/
Q
to adjust the white level. Select
from 10 levels, from 5% to 80%.
Press
P
/
R
to adjust the optical output
value. Select a value from 0 to 100.
Custom Gamma
Custom Gamma
Custom Gamma Edit
On
SEL./ADJ.
RETURN
Return
ENTER
END
Reset
Output:
XX%
Input: XX%
•
•
1
2
3
4
5
Press ENTER to display the
confi rmation screen. Use
P
/
R
to
select “Save” and press ENTER .
6
To complete the Custom Gamma
adjustment, select “Return” and
press
ENTER .
Adjusting the Colors
You can select the color of the projected
image to correct and then adjust it to the
desired color by setting “Hue”, “Saturation”,
“Value”, and “Effect”.
Before performing this adjustment, prepare
the image to be adjusted.
You can perform this adjustment easier in the
still image than in the moving image. •
•
Note
1
Select “C.M.S.1” or “C.M.S.2”
(C.M.S.: Color Management
System) in the “Advanced” menu,
and press
Q
.
If there is no data for the stored corrected
color, the color selection screen and the
picker is displayed. (Go to step 2.)
Picker
•
5
6
1
Picture Adjustment (“Picture” Menu) (Continued)
Menu operation
n
Page 42