Sharp XV-Z30000 Operation, Руководство по эксплуатации

Страница: 32 / 92

30
Using the Adjustment Feet
When the position of the projected image cannot
be adjusted with the lens shift function, use the
adjustment feet to adjust the projected angle.
The height of the projector can be adjusted using
the adjustment feet when the screen is located
higher than the projector, the screen is inclined or
when the installation site is slightly inclined.
Install the projector so that it is as perpendicular
to the screen as possible.
Rotate the adjustment feet to
adjust the projected angle.
The projector is adjustable up to approximately 9
degrees (front) and approximately ±2 degrees
(rear) from the standard position.
•
•
•
•
Adjustment feet
Up
Up
Down
Down
Warning!
Do not hold the lens and lens cover when
projector angle is adjusted.
Use caution not to pinch your fi nger in the
space between the adjustment foot and the
projector when the projector angle is lowered. •
•
Image Projection (Continued)
Adjusting the Focus
Press FOCUS +/– on the remote
control to adjust the focus.
R
On-screen display
TESTPATTERN
FOCUS
Info
It is recommended that the focus be adjusted
after the projector has warmed up for at least
30 minutes. •
Adjusting the Projected
Image Size
Press ZOOM +/– on the remote control
to adjust the projected image size.
R
On-screen display
TESTPATTERN
ZOOM
ZOOM buttons
FOCUS buttons
After you have pressed FOCUS or ZOOM on
the remote control, you can display the test
pattern by pressing
ENTER . The test pattern
is useful for making more accurate
adjustments.
For fi ne adjustments, when
H&V SHIFT ,
FOCUS or ZOOM is pressed, the projected
image moves a small amount in the desired
direction for approximately one second. Hold
down the buttons to move the projected
image quickly.
•
•
Note