Sharp ViewcamZ VL-Z500E-S, Руководство по эксплуатации

Страница: 55 / 127

Useful Features
45
Self recording with reversed
grip
Available mode:
Tape Camera
Rotate the grip 105° and the LCD monitor
180° vertically so that you can record
yourself while holding the grip.
3
Open the LCD monitor to a 90° angle
to the camcorder body (
1
), and then
rotate it 180° vertically (
2
).
4
Set the Media Selection switch to
V
.
5
Set the Power switch to
v
.
6
Begin recording.
Notes:
• Do not rotate the monitor section to the self
recording position during recording or
playback.
• During self recording with reversed grip, the
mode or menu screen cannot be displayed.
• All of the manual settings are set to AUTO
and some other settings will set to OFF in self
recording with reversed grip.
• You may experience image noise when using
self recording.
• To operate self recording with reversed grip
correctly, make sure to turn the grip and the
lens section so that the Record Start/Stop
button and the tripod socket face upward,
and the lens faces toward you. The
I
indicator will appear.
• Be sure that the LCD monitor rotation is
exactly 180°, otherwise the image recorded
will be rotated 180° upside-down.
• In self recording with reversed grip in Card
Camera mode, the still images will be
recorded rotated 180° upside down. The
J
indicator will appear in this case.
• The viewfinder does not work in self
recording with reversed grip.
• It is recommended to set the LED video light
to “OFF” in self recording.
1
Turn the camcorder downward as
shown below.
2
Rotate the lens section 105° vertically
as shown below.
180°
90°
105°
VL-Z500E-E-038-048 04.2.17, 9:20 AM 45