Sharp ViewcamZ VL-Z500E-S, Руководство по эксплуатации

Страница: 116 / 127

Appendix
Appendix
106
Symptom
No image appears
on connected TV
screen.
No image from an ex-
ternal source ap-
pears on the
camcorder screen.
Cannot rewind or fast
forward tape.
Video noise in image.
No sound.
Tape does not work.
Still images in Card
mode are rotated
180° upside down.
Motion images are
rotated 180° upside
down.
Possible cause
Video input channel on TV or TV
channel is not selected properly.
Audio/video/S-video cable is not
properly connected.
DV cable or audio/video/S-video
cable is not properly connected.
The cable connection does not
match the S-VIDEO IN menu setting.
Position at beginning or end of tape.
Using a cleaning tape
Dirty video heads.
Old or worn tape.
Using a 12-bit recording tape with
AUDIO menu item set to “AUDIO 2”.
Power switch is set to Camera
mode.
Media Selection switch is set to
Card mode.
Battery pack is depleted.
The images are recorded in self re-
cording with reversed grip.
Improper self recording.
Suggested solution
Select video input channel or TV
channel properly (
p. 31 ).
Connect audio/video/S-video cable
properly (
p. 31 ).
Connect DV cable or audio/video/S-
video cable properly (
pp. 68, 70,
72 ).
Set the S-VIDEO IN menu item to
“ON” for S-video connection, or
“OFF” for video connection (
p. 69 ).
Rewind or fast forward tape to de-
sired point (
p. 29 ).
The cleaning tape will automatically
rewind after cleaning finishes (
p.
viii ).
Call for service or use a commer-
cially available cleaning tape (
p.
viii ).
Use a new cassette.
Set the AUDIO menu item to “AU-
DIO 1” or “AUDIO 1
L
2” ( p. 73 ).
Set the Power switch to Playback
mode (
p. 22 ).
Set the Media Selection switch to
Tape mode (
p. 22 ).
Charge battery pack or replace it
with a fully charged one (
pp. 6–8 ).
Transfer the data to PC ( pp. 89–94 ),
and rotate the images 180° back by
using a commercially available edit-
ing software.
Turn on Rotate Playback ( p. 53 ).
Pla
ybac
k mode
VL-Z500E-E-105-115 04.2.17, 9:25 AM 106