Sharp VC-V50S Скачать руководство пользователя страница 21

Страница: 21 / 74

VC-V50S
VC-V80T
VC-V91T

4-20 REPLACEMENT OF DRUM D.D. MOTOR

1. Set the ejection mode.
2. Withdraw the main power plug from the socket.

• Removal (Perform in numerical order.)
1. Disconnect the FFC cable

2. Unscrew the D.D. stator assembly fixing screws

3. Take out the D.D. stator assembly

4. Unscrew the D.D. rotor assembly fixing screws

5. Take out the D.D. rotor assembly

Notes:
1. In removing the D.D. stator assembly, part of the drum

earth spring pops out of the pre-load collar.
Be careful not to lose it.

2. Install, so that the D.D. rotor ass'y and upper drum ass'y

mounting direction check holes align.
(Align the upper drum dent with the rotor hole.)

3. Be careful not to damage the upper drum or the video

head.

4. Protect the hole elements from shock due to contact with

D.D. stator or D.D. rotor ass'y.

5. After installation adjust the playback switching point for

adjustment of servo circuit.

4-19 REPLACEMENT OF THE CAPSTAN D.D.

(DIRECT DRIVE) MOTOR

• Remove the mechanism from the main PWB (refer to 2-

2 item 1. When removing the mechanism from the main
PWB").

• Removal (Follow the order of indicated numbers.)

1. Remove the reel belt

2. Remove the show brake lever

3. Remove the three screws

Figure 4-38.

D.D. stator ass'y

D.D. rotor ass'y

FFC

Upper drum

Capstan D.D.
motor

Capstan D.D. motor
control PWB

Reel belt

Figure 4-37-1.

Slow Brake Lever

• Reassembly
1. Taking care so that the capstan shaft does not contact

the mechanism chassis, set its position on the mecha-
nism chassis, and then install with the three screws.

2. Install the slow brake lever.
3. Install the reel belt.
Notes:
1. Before installing the capstan D. D. motor, conflrm whether

an acetate tape (ZTAPEN1200020E) is drawn on the
back of mechanism chassis.

2. After installing the capstan D.D. motor, be sure to rotate

the capstan D.D. motor and check the movement.

3. Set the tape, and check for the tape crease near the

reverse guide in the playback mode. Adjust the A/C
head and azimuth as stated in 4-18 item 2. If crease is
found, adjust as stated in 4-17 "HEIGHT ADJUSTMENT
OF REVERSE GUIDE".

Figure 4-37-2.

Stick an acetate tape
on the projection part
of the chassis.

Capstan Motor Installation
position.

Mechanism Chassis from the back.

Содержание VC-V50S











































































Результаты поиска

Содержание VC-V50S

Отзывы:

Похожие инструкции для VC-V50S

Бренды по названию

Популярные бренды

Sharp VC-V50S, Руководство по обслуживанию

Результаты поиска

Содержание VC-V50S

Отзывы:

Похожие инструкции для VC-V50S

Бренды по названию

Популярные бренды