4.2 UP-T80BP LOGO
No
Procedure on P.C. side
No
Procedure on UP-3300 side
1
Install "UTL33.EXE" on the P.C.
2
Enter the SRV mode. Then turn OFF the power or UP-3300.
3
While pressing the On-Line key, tum ON the power of UP-3300.
Keep pressing the On-Line key, and then press the Feed key
also. (Don’t move a finger from the On-line key.)
4
UP-T80BP enters into LOGO mode.
UP-T80BP prints out
"
****************
".
5
Go into "UP-T80BP Utility mode".
Select "6 UP-T80BP Utility" in SRV mode.
6
Starting of "UP-T80BP Utility mode".
UP-3300 shows
7
Connect P.C. and UP-3300 via IR. (Fig 1)
8
Execute "UTL33.EXE" on P.C.
Operation:
>UTL33 LOGO.BMP
("LOGO.BMP" is a file name of Bit-Map image.)
9
Program data is sent to UP-3300 automatically.
9
Program data is received from P.C. automatically.
10
"UTL33.EXE" is completed.
P.C. shows
"Completed."
10
ER-3300 shows
"Completed."
And UP-T80BP prints out the LOGO image.
11
Touch "OK" button.
12
Touch "EXIT" button.
13
Turn OFF the power of UP-3300.
14
Execute "Master Reset" on UP-T80BP.
4.3 UP-T80BP IPL
No
Procedure on P.C. side
No
Procedure on UP-3300 side
1
Install "UTL33.EXE" on the P.C.
2
Turn OFF the power of UP-3300.
3
Select "IPL Mode" on UP-T80BP.
Set the Bit 1 of DipSwitch 2 to "ON" to enter "IPL Mode".
4
While pressing both the Feed key and the On-Line key, turn ON
the power of UP-3300.
The ERROR Lamp and the On-line Lamp of UP-T80BP is
blinking.
UP-T80BP Utility
EXIT
UP-T80BP Utility
Normal mode
EXIT
UP-T80BP Utility
Normal mode
EXIT
Complete
OK
IPL SW
ON
IR Filter
3 – 5