Settings 103
Master Reset
“Settings”
o
“Phone Settings” tab
o
“Master Reset”
o
“Reset Settings”
1.
Enter your handset code.
The default handset code is “9999”. For details on changing
the handset code, see “Change Handset Code” on page 102.
Note
•
Some settings are not deleted by this function. Data stored in
Phonebook, etc. is not deleted.
To Reset All Settings for M1 to M12 and Delete All Created
Data
“Settings”
o
“Phone Settings” tab
o
“Master Reset”
o
“Reset All”
1.
Enter your handset code.
The default handset code is “9999”. For details on changing
the handset code, see “Change Handset Code” on page 102.
Call Settings
Answer Phone
When you cannot answer a call, you can record the caller’s
message on your phone. After the answering message is played
back, the caller can record a message. You can also use this
function to record the caller’s voice during a call.
“Settings”
o
“Call Settings” tab
o
“Answer Phone”
1.
Select “Switch On/Off”.
2.
Select “On” to enable this function.
3.
Select one of the following options, if necessary.
“Answer Time”:
Sets the time before the answering
message is played back when this
function is enabled.
“Guidance Message”: The contents of the answering message
can be checked.
“Volume”:
Sets whether or not to play the caller’s
message while it is being recorded.
Note
•
The Answer Phone function is not available when the power is
turned off or when the phone is outside the service area.
•
Press
F
while receiving an incoming call to put the call on
hold.
Tip
•
Long press
U
in standby to enable or disable the Answer
Phone function.
•
During a call, press [Options] and select “Record” to record the
caller’s voice.
•
You can enable Answer Phone for the profiles “Silent” and
“Original”.
•
Answer Phone is always enabled for the “Car” profile.
(M 9-13-2)
(M 9-
d
-1)
