63
LC-43LB371U/LC-50LB371U 43"/50" 1080p, 60Hz, LED Sharp Roku TV
What if I can’t access the Factory Reset option?
It is possible that your Sharp Roku TV might get into a state where you cannot access the various menus, including the menu
option that lets you perform a factory reset operation. If that happens, you can force your Sharp Roku TV to reset by
following these steps:
1
Using a straightened paper clip or ball-point pen, press and hold the recessed
RESET
button on your Sharp Roku TV
connector panel.
2
Continue to hold the
RESET
button for approximately 15 seconds.
During this time, the status light turns off, and then turns on bright, and then pulses. When the reset cycle completes, the
light either comes on dim (if your Sharp Roku TV power was off when you started) or your Sharp Roku TV screen comes
on and the light turns off (if your Sharp Roku TV power was on when you started).
3
When the status light turns on steady dim or your Sharp Roku TV screen comes on, release the
RESET
button.
4
Proceed through Guided Setup. See
on page
.
Getting system updates
If your Sharp Roku TV is connected to the Internet and linked with a Roku account, it will automatically get updates from
time to time. You don’t need to do anything. But if you are aware that an update is available and you don’t want to wait until
your Sharp Roku TV updates itself, you can manually check for updates.
If your Sharp Roku TV is not connected to the Internet, you can still get updates by using a USB flash drive.
You can download an updated
User Guide
that matches your Sharp Roku TV software version from the Sharp web site at:
http://www.sharpusa.com/manuals/hd.aspx
To determine your current Sharp Roku TV software version, go to
Settings > System > About
after you complete Guided
Setup.
Checking for updates on a connected Sharp Roku TV
If you’re one of those people who has to have the latest, most up-to-date gadgets the moment they are available, you can
check for updates as often as you want.
To check for updates, navigate to
Settings > System > System update
, and then select
Check now
. Your Sharp Roku TV
responds either with a message saying that your Sharp Roku TV is up to date, or with a message saying that an update is
available.
Follow the instructions on the screen to install the system update.
Getting updates on a non-connected Sharp Roku TV
If your Sharp Roku TV is not connected to the Internet, you can still get system updates by using a USB flash drive and a
computer with an Internet connection.
To get a system update, navigate to
Settings > System > System update
:
The
System update
screen on a non-connected Sharp Roku TV gives you the opportunity to connect your Sharp Roku TV to
the Internet to automatically receive updates. We recommend this option if it is possible in your situation. To proceed, select
Connect to the Internet
and follow the instructions in
But what if I didn’t connect my Sharp Roku TV?
on page
.
