44
LC-43LB371U/LC-50LB371U 43"/50" 1080p, 60Hz, LED Sharp Roku TV
Now, you’re ready to watch broadcast TV! While you're watching, try the following:
• Press
UP
or
DOWN
to change channels.
• Press
RIGHT
to display the channel list and then use
UP
or
DOWN
to select a channel to watch. Or press
REWIND
or
FAST
FORWARD
to jump through the channel list a page at a time.
• Press
OK
to display information about the current program.
• Press
to switch to the previously tuned channel.
• Press to see options for picture and sound settings.
Using your Sharp Roku TV
This section provides information on using the day-to-day features of your Sharp Roku TV.
Sharp Roku TV status light
Your Sharp Roku TV has a single status light on the front panel. It goes on and off and blinks in different ways depending on
the status of your Sharp Roku TV, as shown in the following table:
Standby mode energy savings
About 10 minutes after you turn off your Sharp Roku TV, it goes into a very low power standby mode. Until that happens, if
you turn on your Sharp Roku TV again, it immediately displays the activity you selected in the Power on settings, as
described in
on page
. After your Sharp Roku TV goes into the low power standby mode, it takes a bit
longer to start up.
Note
If
is not available on your remote control, you can use
on the Roku mobile app
or the Jump Back button on a universal remote. For more information, see
on page
on page
has more information on using the remote
control buttons while watching TV.
TV condition
Status indicator
Meaning
On (screen is active)
Off
Screen is communicating that your Sharp
Roku TV is on.
Screensaver (screen is active) Off
Screen is communicating that your Sharp
Roku TV is on.
Off (no power)
Off
Your Sharp Roku TV is not connected
power.
Off (standby)
On
Your Sharp Roku TV is connected to power
and ready to use.
Starting up from off state
Slow pulsing blink until
startup completes
Your Sharp Roku TV is doing something.
On (receiving update from
USB)
Slow pulsing blink until
update completes
Your Sharp Roku TV is doing something.
Remote control command
received
Dims on/off once
Your Sharp Roku TV has received your
command.
Powering down to standby
mode
Slow pulsing blink until
your Sharp Roku TV
reaches standby.
Your Sharp Roku TV is doing something.
