CHAPTER 6. FIRMWARE UPDATA PROCEDURES/EDID WRITING PROCEDURES
PN-T321/T322B
FIRMWARE UPDATA PROCEDURES/EDID WRITING PROCEDURES
6 – 4
2 - 3. SUPPLEMENTARY DESCRIPTIONS
■
SETTING THE PRINTER PORT I/O ADDRESS TO 378
<FOR Windows XP>
1 ) Open the system of the control panel.
2 ) Open the hardware tag, and click the “Device manager” button.
3 ) Click “+” mark on the left of “Port (COM/LPT)”
Check to confirm that there is “ECP printer port (LPT1).”
4 ) Open the property of the printer port (LPT1), and open the resource tag.
5 ) Uncheck “Use automatic settings” and select “Current configuration.”
(If “I/O range” is already “0378 - 037F,” there is no need to change.)
<FOR Windows Vista, Windows 7>
1 ) Open the system of the Control Panel.
2 ) Open the System and Maintenance, and click the Device Manager.
3 ) Click the [Continue] button in User Account Control Dialog.
4 ) Click “+” mark on the left of “Port (COM/LPT)”.
Check to confirm that there is “ECP printer port (LPT1).”
5 ) Open the property of the printer port (LPT1), and open the resource tag.
6 ) Uncheck “Use automatic settings” and select “Current configuration.”
(If “I/O range” is already “0378 - 037F,” there is no need to change.)
Microsoft Windows
User Account Control
Windows needs your permission to continue
If you started this action, continue.
Microsoft Management Console
[Continue]
[Cancel]
