CHAPTER 5. SERVICE MENU/VARIOUS SETTING TOOL OPERATING PROCEDURES
PN-T321/T322B
SERVICE MENU/VARIOUS SETTING TOOL OPERATING PROCEDURES
5 – 3
5. NTSC SETUP LEVEL
To change the set up level of NTSC.
1 ) Display the SERVICE MENU2.
2 ) Select [NTSC SETUP LEVEL] by the button [VOL+ (
2
)][VOL- (
4
)], and press the button [ (
3
)].
3 ) Select [0IRE] or [7.5IRE] by the button [BRIGHT- (
1
)][ (
3
)], and press the [MENU] button.
6. INSTRUCTIONS FOR LAUNCHER TOOL
■
TOOL OPERATING ENVIRONMENT
n
Windows XP
n
Windows Vista
n
Windows 7
MEMO
n
Log in with the administrator’s right.
■
INSTALLATION PROCEDURES
1 ) All tools are provided in a zip file. Extract a zip file to the drive ( C:\).
CAUTION
n
When a space is included in the folder pass, it may not run properly.
2 ) Where it doesn’t have “Microsoft Visual C++ 2005 Runtime Library” installed, execute “vcredist_x86.exe” to install the library.
*
When the message: “Command line option syntax error, Type Command /? for Help.” is displayed, the user name may contain some 2-byte char-
acters (Japanese). Log in with the user name of 1-byte characters (English) having administrative right, and install it. If there is no user name
created, newly create a user name through the User Account in the Control Panel.
■
USE INSTRUCTIONS
1 ) Execute “ServiceToolsLauncher.exe” in the folder where the ser-
vice tool is extracted.
MEMO
n
If it cannot be executed, the library may not be installed. In this
case, please install the library, referring to Installation Procedures
shown above.
3
Refer to page 5 - 3 “
■
INSTALLATION PROCEDURES”.
n
In the case of Windows Vista/7, the window of “User Account Control”
is displayed as shown below, so you need to click [Permit] or [Yes].
2 ) Once the service tool is booted, press the button as needed to con-
duct operations.
Button
Description
Serial Number
Read/Write serial number of the display.
Usage Time
Read/Write usage time of the display.
Temp Watch
Read temperature watch data of the display.
EDID
Write EDID data in the display.
