manualshive.com logo in svg

Sharp FO-220, Руководство по эксплуатации, Страница: 26 / 133

Поделиться
Скачать
Sharp FO-220 Скачать руководство пользователя страница 26

24

V. PROGRAMMING

Switch 1 

 FINE RESOLUTION PRIORITY

Select the “FINE’ setting if a higher

resolution (better copy quality) is desired when transmitting or copying a

document. This setting can be overridden when desired by selecting a par-
ticular resolution setting with the MODE key. (Note: Using the “FINE” set-
ting may increase the time and cost of a phone connection over the

“STANDARD” setting.)

Switch 2 

 NUMBER OF RINGS TO ANSER:

This function only operates when

the machine is set to “AUTO” reception, and determines the number of rings

before the machine answers the call and starts fax reception. Use the “1
RING” setting when the machine has a dedicated line for fax, and all calls
should be answered immediately by the machine. Select the “6 RINGS’ for

the a’bility to answer a call personally when desired before the 6th ring. If
you answer a call and hear a fax tone (someone is trying to send you a
fax), press the START key and hang-up for reception to begin.

Switch 3 

 LENGTH OF ACTIVITY REPORT:

Select the “11” setting if you

wish to have the Send/Receive (Activity) Reports printed 

 in length. Use

the “VARIABLE” setting to have one continuous print-out of each report,
where length is dependent upon amount of data stored since last print-out.

(Note: “VARIABLE” setting will conserve paper when stored data does not
fill-up complete 11” length report.)

Switch 4 

 AUTO PRINT-OUT

Select “YES” to have the machine automatically

print-out the Send/Receive Activity Reports after every 30 transactions since

the last print-out. The report can still be printed on demand when desired.

Use “NO” to print-out the report only when necessary. (Note: If the report
is not printed by the 30th transaction, the older data will be erased. All data
is erased after it is printed out.)

Switch 5 

RECALL WAIT INTERVAL: Select “1 minute” when automatic

redials of a busy telephone number should be made quickly. Use “5 minutes”

setting for a longer wait period.

Switch 6 

NUMBER OF RECALLS: Select “5 recalls” for maximum redial

attempts with a busy telephone number. If connection is not made after
5 or 2 redials, Transaction Report will automatically print-out and you will
find original documents still sitting in the automatic document feeder.

Содержание FO-220






































































































































Отзывы:

Нет отзывов