Sharp FO-220 страница 108 Скачать руководство пользователя

Страница: 108 / 133

106

XIV.

USER MAINTENANCE

A. RECOMMENDED THERMAL RECORDING PAPER

The following Sharp-brand thermal paper is available for the FO-220. It is recom-

mended to assure long life of the machine and to obtain the best possible
reproduction quality.

THERMAL PAPER

8.5” x 98.4’ (216 mm x 30 m) rolls,
6 rolls per carton

NOTES:

Use only the specified type of recording paper.

Paper is available from your authorized Sharp Facsimile Dealer.

Using non-Sharp brand paper may result in damage to the machine, poor

copy quality and excessive residue build-up on the thermal recording head.

B. CAUTIONS ON STORING PAPER

Pay attention to the

points when storing the recording paper.

Do not keep the recording paper in a place subject to high humidity or tem-

perature since in such a condition the paper becomes more susceptible to
coloring.

Do not keep the recording paper in a place subject to direct sunlight (such

as near a window), as this will cause the recording paper to discolor.

The recording paper may become discolored in the following cases.

Rubber-derived glue, Cemedine, thinner bond, and stick glue are used.

Contact with a freshly duplicated Diazo (blueprint) copy.

Contact with a rubber eraser or adhesive tape.

The paper is scratched, causing friction heat.

Do not unpack the recording paper until you are ready to use it.

Содержание FO-220






































































































































Результаты поиска

Содержание FO-220

Отзывы:

Похожие инструкции для FO-220

Бренды по названию

Популярные бренды

Sharp FO-220, Руководство по эксплуатации

Результаты поиска

Содержание FO-220

Отзывы:

Похожие инструкции для FO-220

Бренды по названию

Популярные бренды