Sharp el-9950 Скачать руководство пользователя страница 229

Страница: 229 / 266

228

Appendix

1. Replacing Batteries

The calculator uses two different kinds of batteries: manganese (AAA) for unit operation,
and lithium (CR2032) for memory backup.

Compatible battery types

Type (use)

Model

Quantity

Manganese battery

AAA

(for unit operation)

Lithium battery

CR2032

(for memory backup)

Note: • To prevent loss of stored data, DO NOT remove both the unit

operation and memory backup batteries at the same time.

• Please do not use rechargeable battery. This can lead to a

malfunction of the device.

• Batteries are factory-installed before shipment, and may be

exhausted before they reach the service life stated in the
specifications.

Precautions for
handling batteries

• Fluid from a leaking battery accidentally entering an eye could

result in serious injury. Should this occur, wash with clean water
and immediately consult a doctor.

• Should fluid from a leaking battery come into contact with your

skin or clothes, immediately wash with clean water.

• If the product is not to be used for some time, to avoid damage to

the unit from leaking batteries, remove them and store in a safe
place.

• Do not leave exhausted batteries inside the product.

• Do not fit partially used batteries, and be sure not to mix different

batteries types.

• Keep batteries out of the reach of children.

• Do not allow batteries to become completely exhausted; doing so

may cause the batteries to leak, and may damage the calculator’s
hardware.

• Do not throw batteries into a fire or water, as this may cause

them to explode.

Содержание el-9950











































































































































































































































































Результаты поиска

Содержание el-9950

Отзывы:

Sharp el-9950, Руководство пользователя, Страница: 229 / 266

Результаты поиска

Содержание el-9950

Отзывы: