Sharp DT 100 - WVGA DLP Projector Скачать руководство пользователя страница 56

Страница: 56 / 62

Appendix

Troubleshooting

No picture and no sound

or projector does not

start.

Sound is heard but no

picture appears (or picture

is dark).

Color is faded or poor.

Picture is blurred;

noise appears.

Picture appears but no

sound is heard.

An unusual sound is

occasionally heard from

the cabinet.

Maintenance indicator on

the projector illuminates

or blinks in red.

Problem

Check

• Projector power cord is not plugged into the wall outlet.

• Power to the external connected devices is off.

• The selected input mode is wrong.

• Cables incorrectly connected to the projector.

• Remote control battery has run out.

• External output has not been set when connecting notebook

computer.

• The lamp unit cover is not installed correctly.

• Cables incorrectly connected to the projector.

• “Bright” is set to minimum position.

• Depending on the computer you are using, an image may not be

projected unless the signal output setting of the computer is
switched to the external output. Refer to the computer’s operation
manual for how to switch its signal output settings.

• Image adjustments are incorrectly set.
• Make adjustments of “Color” and “Tint” in “Picture Mode” and lower

the “Bright Boost” value.

(Video Input only)

• Video input system is incorrectly set.

• Adjust the focus.

• The projection distance exceeds the focus range.

(Computer Input only)

• Perform “Fine Sync” Adjustments (“Clock” Adjustment)

• Perform “Fine Sync” Adjustments (“Phase” Adjustment)

• Noise may appear depending on the computer.

• Cables incorrectly connected to the projector.

• Volume is set to minimum.
• When the projector is connected to an external device and the

volume is set to minimum, the sound is not output even if you turn up
the volume of the external device.

• “Speaker" is set to “Off”.

• If the picture is normal, the sound is due to cabinet shrinkage

caused by room temperature changes. This will not affect operation
or performance.

• See “Maintenance Indicators”.

Page

–

23–27

51, 52

23–27

–

23–27

–

The projector cannot be
turned on or put into the

standby mode using the
STANDBY/ON button on

the projector.

• The keylock is set.

If the keylock is set to “ON”, all the buttons are locked.

DT-100_EN_k

05.7.22, 5:56 AM

Содержание DT 100 - WVGA DLP Projector































































Результаты поиска

Содержание DT 100 - WVGA DLP Projector

Отзывы:

Похожие инструкции для DT 100 - WVGA DLP Projector

Бренды по названию

Популярные бренды

Sharp DT 100 - WVGA DLP Projector, Руководство по эксплуатации

Результаты поиска

Содержание DT 100 - WVGA DLP Projector

Отзывы:

Похожие инструкции для DT 100 - WVGA DLP Projector

Бренды по названию

Популярные бренды