44
Adjusting the Projector Function (“PRJ - ADJ” menu)
Picture
Auto Search
SCR - ADJ
PRJ - ADJ
Help
Auto Sync
Auto Power Off
System Sound
h
Off
On
On
Off
SEL./ADJ.
ENTER
END
0
Lamp Timer(Life)
100%
Speaker
On
RS-232C
9600 bps
Fan Mode
Normal
1
1
1
1
1
Auto Search Function
This function automatically searches for and
switches to the input mode in which signals are
being received, when the projector is turned on,
or when the INPUT button is pressed.
When “Auto Search” is set to “On”
• If two or more input signals are found, the pro-
jector selects the input source in the order of
INPUT 1
n
INPUT 2
n
INPUT 3
n
INPUT 4
when you press INPUT (
P
/
R
) on the projec-
tor.
• While “Auto Search” is set to “On”, press
C
INPUT 1,
C
INPUT 2,
D
INPUT 3 or
E
INPUT 4 on the remote control to select
an input mode other than the input mode se-
lected by the projector.
Note
2
2
2
2
2
Auto Sync (Auto Sync
Adjustment)
Menu operation
n
Page
39
• Auto Sync adjustment is also performed by
pressing
F
AUTO SYNC on the remote con-
trol.
• The Auto Sync adjustment may take some time
to complete, depending on the image of the
computer connected to the projector.
• When the optimum image cannot be achieved
with Auto Sync adjustment, use manual ad-
justments. (See page
46
.)
Note
Selectable items
On
Off
Description
Auto Sync adjustment will
occur when the projector is
turned on or when the input
signals are switched, when
connected to a computer.
Auto Sync adjustment is not
automatically performed.
*
Serviceman only
DT-100_EN_i
05.7.22, 5:54 AM
44
