32
Image Projection (Continued)
Displaying the Black Screen
and Turning off the Sound
Temporarily
Adjusting the Volume
Press
K
/
L
on the remote control or
–
O
/
Q
+ on the projector to adjust the vol-
ume.
• Pressing
K
/–
O
will lower the volume.
• Pressing
L
/
Q
+ will raise the volume.
• When the projector is connected to external
equipment, the volume level of the external
equipment changes in accordance with the
volume level of the projector. Set the projector’s
volume to the lowest level when turning the
projector on/off or changing the input signal.
• When you do not want to output the sound from
the projector’s speaker while the projector is
connected to external equipment, set
“Speaker” in “PRJ-ADJ” menu to “Off”. (See
page
45
.)
Press
M
AV MUTE on the remote con-
trol to temporarily display a black
screen and turn off the sound.
• Pressing
M
AV MUTE again will turn the projected
image back on.
On-screen Display
Note
Note
On-screen Display
Volume buttons
AV MUTE button
DT-100_EN_g
05.7.22, 5:52 AM
32
