Quic
k Star
t
17
Select the “INPUT 3” using the INPUT button on the projector or
D
INPUT 3 on the remote
control.
5. Select the INPUT mode
• When pressing the INPUT button on the projector, input mode switches in the following
order:
INPUT1
INPUT2
INPUT3
INPUT4
• When using the remote control, press the
C
INPUT 1/
C
INPUT 2/
D
INPUT 3/
E
INPUT
4 button to switch the INPUT mode.
On the
projector
On the remote
control
On-screen display
_
P.
30
INPUT 3
S
Correcting trapezoidal distortion using the Keystone Correction.
7. Correct trapezoidal distortion
_
P.
33
On the projector
On the remote control
Shrinks
upper side.
Shrinks
lower side.
4. Turn the video equipment on and start playback
8. Turn the Power off
Press the STANDBY/ON button on the projector or the STANDBY button on the remote control,
and then press the button again while the confirmation message is displayed, to put the projector
into standby mode.
• Unplug the power cord from the AC outlet after the cooling fan stops.
On-screen Display
On the
projector
On the remote
control
_
P.
29
6. Adjust the focus, image size, and projector angle
_
PP.
30, 31
1. Adjust the focus by
turning the focus ring.
2. Adjust the projection
image size by turning
the zoom ring.
3. Adjust the projector
angle using the HEIGHT
ADJUST lever.
Zoom ring
Focus ring
DT-100_EN_d
05.7.22, 5:49 AM
17
