manualshive.com logo in svg

Sharp DM-3551, Руководство по эксплуатации, Страница: 280 / 286

Поделиться
Скачать
Sharp DM-3551 Скачать руководство пользователя страница 280

4

1

Open the front cover.

2

Lower the cartridge lock lever.

3

Pull out the duplex module.

Unlatch the unit and gently
move a module away from
the machine.
If the machine is not
equipped with a duplex
module, open the side
cover similarly.

4

While depressing the lock release button, pull
out the drum/toner cartridge and remove it.

5

Remove a new drum/toner cartridge from its bag
and remove the protective material A.

A

6

Shake the new cartridge horizontally five or six
times.

ADDING TONER

When the drum/toner cartridge becomes empty of toner, a message indicating
the need to replace the drum/toner cartridge will appear on the display. Replace
the drum/toner cartridge following the procedure below.

The machine as shipped does not have a cartridge installed. Follow steps 5
and 6 below for installing the first cartridge.

NOTE

●

The drum/toner cartridge contains toner and a photoconductive drum. The photoconductor on the drum can deteriorate
by exposure to light for an extended period of time.

●

Do not remove the cartridge from its protective package until it is to be installed into the machine.

Содержание DM-3551































































































































































































































































































Отзывы:

Нет отзывов