manualshive.com logo in svg

Sharp DM-3551, Руководство по эксплуатации, Страница: 167 / 286

Поделиться
Скачать
Sharp DM-3551 Скачать руководство пользователя страница 167

0-3

Fusing unit

Adjuster

Lock

Release

“BATTERY DISPOSAL”

THIS MACHINE CONTAINS A MANGANESE DIOXIDE BATTERY WHICH MUST BE DISPOSED
OF PROPERLY. CONTACT YOUR SHARP DEALER OR SERVICER FOR INSTRUCTIONS.

This product utilizes tin-lead solder, and a fluorescent lamp containing a small amount of mercury.
Disposal of these materials may be regulated due to environmental considerations.
For disposal or recycling information, please contact your local authorities or the Electronics Industries
Alliance: www.eia.org

CAUTIONS

1. Do not touch the photoconductive drum. Scratches

or smudges on the drum will cause dirty prints.

2. The fusing unit is extremely hot.  Exercise care in

this area.

3. Do not look directly at the light source of the scanner

module. Doing so may damage your eyes.

4. Five adjusters are provided on all optional stand/

paper drawer units. These adjusters should be
lowered until they contact the floor.

5. Do not make any modifications to this machine.

Doing so may result in personal injury or damage to
the machine.

6. Since this machine is heavy, it is recommended that

it be moved by more than one person to prevent
injury.

7. When connecting this machine to a computer, be

sure to first turn both the computer and the machine
off.

8. Do not print anything which is prohibited from printing

by law. The following items are normally prohibited
from printing by national law. Other items may be
prohibited by local law.

●

 Money   

●

 Stamps 

  ●

 Bonds 

  ●

 Stocks

●

 Bank drafts  

●

 Checks   

●

 Passports

●

 Driver's licenses

Содержание DM-3551































































































































































































































































































Отзывы:

Нет отзывов