manualshive.com logo in svg

Sharp DM-3551, Руководство по эксплуатации, Страница: 216 / 286

Поделиться
Скачать
Sharp DM-3551 Скачать руководство пользователя страница 216

2-18

■

 Paper setting

1

Select “Page Setup” from the [File] menu
of application software.

The following display will appear. (The display varies
with the operating system versions, printer driver
versions, and application software.)

2

  Adjust each setting.

●

Paper size, reduction/enlargement, and orientation
can be set.

3

 Click the [OK] button.

■

 Print condition setting

1

Select “Print” from the [File] menu of
application software.

The following display will appear. (The display varies
with the operating system versions, printer driver
versions, and application software.)

2

  Adjust each setting.

Number of copies, page range, and other settings can
be made.
If the printer has been configured for the auditing mode,
an assigned 5-digit account number must be specified.
To use the job retention with password, specify a five-
digit password.
To specify an account number or a password for the job
retention function, click “

” to the right of ‘General’ and

select ‘Job Control’.

●

The account numbers used for printing are common
to those for copying. The account numbers for printing
must be registered to the computer using the PPD
utility.

3

  Click the [Print] button.

USING THE MACHINE AS A POSTSCRIPT PRINTER

Содержание DM-3551































































































































































































































































































Отзывы:

Нет отзывов