manualshive.com logo in svg

Sharp DM-3551, Руководство по эксплуатации, Страница: 255 / 286

Поделиться
Скачать
Sharp DM-3551 Скачать руководство пользователя страница 255

5-17

5

SADDLE STITCH FINISHER

The saddle stitch finisher can automatically place two staples for centerline binding of prints or copies and fold them
along the centerline.

An optional hole punching unit is available for installation into the finisher.

Part names

NOTES

●

Do not press on the saddle stitch finisher (particularly the offset tray).

●

Be careful about the offset tray during printing because the tray moves up and down.

●

The saddle stitch finisher requires the installation of other peripheral devices in order to be functional and
cannot be installed together with some other devices. The table on page 6-4 shows the configurations which are
compatible.

Offset tray
Output which is stapled or offset
will be delivered to this tray.

Saddle stitch tray
Saddle stitched output is
delivered here.

Top cover
Open for misfeed removal.

Front cover

Open the front cover and pull out this
section for staple cartridge replacement
or to remove jammed staples.

Stapler section
Open the front cover and pull
out this section to replace the
staple cartridge or to remove
jammed staples.

Stapler compiler
Paper to be stapled is stacked
temporarily.

(Continued on next page)

Specifications

Name

Saddle stitch finisher

Number of trays

2

Paper output

Print face down

Tray system

Upper tray: offset tray, Lower tray: saddle stitch tray

Tray capacity

Upper tray:

Non-stapling: Max. 1,000 sheets for 8-1/2 x 11 or A4 or smaller sizes (20 lbs. or
80 

g

/m

2

), max. 500 sheets for 8-1/2 x 13 or B4 or larger sizes (20 lbs. or 80 

g

/m

2

)

Stapling: Max. 30 stapled sets and max. 1,000 sheets for 8-1/2 x 11 or A4 or
smaller sizes (20 lbs. or 80 

g

/m

2

), max. 30 stapled sets and max. 500 sheets

for 8-1/2 x 13 or B4 or larger sizes (20 lbs. or 80 

g

/m

2

)

Lower tray: Stapled print capacity is (6 - 10) sheets x 10 sets or (1 - 5) sheets x
20 sets.

Paper size

Upper tray: 11 x 17, 8-1/2 x 14, 8-1/2 x 13, 8-1/2 x 11, 8-1/2 x 11R, 7-1/4 x 10-1/
2, 5-1/2 x 8-1/2R, A3, B4, A4, A4R, B5, B5R, A5R
Lower tray: max. 11 x 17, 8-1/2 x 11R, A3, B4, A4R

Paper weight

Upper tray: 16 to 54 lbs. or 60 to 205 

g

/m

2

Lower tray: 17 to 34 lbs. or 64 to 80 

g

/m

2

Paper types

Upper tray: plain paper, thick paper
Lower tray: plain paper only

Tray full detection

Provided in both trays

Offset function

Upper tray only

Paper sizes for stapling

Upper tray:11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, A3,

B4, A4, A4R, B5, and B5R

Lower tray: 11" x 17", 8-1/2" x 11"R, A3, B4, and A4R

Содержание DM-3551































































































































































































































































































Отзывы:

Нет отзывов