Sharp DM-3551 Скачать руководство пользователя страница 190

Страница: 190 / 286

1-18

LOADING PAPER

■

Applicable plain paper

For satisfactory results, plain paper must conform to the following requirements.

Paper in AB system

Paper in inch system

A5 to A3

5-1/2 x 8-1/2 to 11 x 17

Plain paper

16 to 28 lbs. or 60 to 105

Recycled, colored, pre-punched, pre-printed and letterhead papers must conform to the same conditions as above.

■

Applicable special paper

For satisfactory results, special paper must conform to the following requirements.

Type

Remarks

Special paper

Thick paper

●

For 5-1/2 x 8-1/2 to 8-1/2 x 11 or A5 to A4 sizes, thick
paper ranging from 16 to 34 lbs. or 60 to 128

can be

used.

●

For sizes larger than 8-1/2 x 11 or A4, thick paper ranging
from 16 to 28 lbs. or 60 to 105

can be used.

●

Other thick papers
Index stock (65 lbs. or 176

) can be used.

Cover stock (110 lbs. or 200 to 205

) can be used but

only for 8-1/2 x 11, A4 paper in the portrait orientation.

●

For 5-1/2 x 8-1/2 or A5 paper, the orientation must be
landscape.

Transparency film, labels,

●

Use SHARP recommended paper. Do not use labels other

and tracing paper

than SHARP recommended labels. Doing so may leave

adhesive residue in the printer, causing paper misfeeds,
smudges on prints or other machine trouble.

Postcards

●

Japanese official postcards can be used.

Envelopes

●

Applicable standard envelopes: COM-10, Monarch, DL, C5,
ISO B5

●

Envelopes can only be fed from the multi-purpose drawer.
Applicable paper stock weight for envelopes is 20 to 23
lbs. or 75 to 90

Содержание DM-3551































































































































































































































































































Результаты поиска

Содержание DM-3551

Отзывы:

Sharp DM-3551, Руководство по эксплуатации, Страница: 190 / 286

Результаты поиска

Содержание DM-3551

Отзывы: