Sharp DM-3551, Руководство по эксплуатации, Страница: 11 / 286

9
NORMAL COPYING
This section describes the normal copying procedure.
Copying from the automatic document feeder
■ ■
■ ■
■
1-sided copies of 1-sided originals
1 Place the originals in the document feeder tray.
(page 7)
2 Ensure that the 1-sided to 1-sided copy mode is
selected.
8 1
2
/
11
x
8
1
2
/
11
x
8
1
2
/
11
x
11 17
x
8
1
2
/
11
x
8 1
2
/
11
x
R
1.
2.
3.
4.
ORIGINAL
The one-sided to one-
sided mode is selected
when no icon for a two-
sided mode appears in the
dashed area on the display.
If the 1-sided to 1-sided
copy mode is already
selected, steps 3 to 5 are
not needed.
3 Touch the [2-SIDED COPY] key.
2-SIDED COPY
OUTPUT
4
Touch the [1-sided to 1-sided copy] key.
The [1-sided to 1-sided] key
will be highlighted.
5 Touch the [OK] key.
OK
0
6
Ensure that paper of the same size as the
originals is automatically selected. (
✼
Note)
COPY RATIO
AUTO
PAPER SELECT
100
%
8
1
2
/
11
X
The selected tray will be
highlighted or the message
“LOAD xxxxxx PAPER.” will
appear. If the message ap-
pears, load paper in a pa-
per tray or the bypass tray
with paper of the required
size. Even if the message
above is displayed, copy-
ing can be performed onto
the currently selected pa-
per.
(
✼
Note) The following requirements must be satisfied.
●
Originals of a standard size (11" x 17", 8-1/2" x 14", 8-1/2"
x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2", A3, B4, A4, A4R or A5)
are set and the auto paper select function is enabled.
TRANSPA 8
1
2
/
11
X
8
1
2
/
11
X
11 17
x
1.
2.
3.
PLAIN
PLAIN
If originals of a size other
than the sizes above are to
be copied, manually select
the desired paper size.
Original Copy
copy-1_Ep.P65 5/16/01, 3:17 PM 9