manualshive.com logo in svg

Sharp DM-3551, Руководство по эксплуатации, Страница: 193 / 286

Поделиться
Скачать
Sharp DM-3551 Скачать руководство пользователя страница 193

1-21

1

Loading paper in the multi purpose drawer

The method of loading paper into the multipurpose drawer is the same as for paper tray 1 described on page 1-16.
For specifications of paper, see page 1-17. When loading envelopes,  postcards or transparency film, follow the
descriptions below.

●

Two maximum height lines are indicated: one for plain paper and one for special paper.

Maximum height line for plain paper
Do not exceed this line when loading plain paper.

Maximum height line for special paper (red line)
Do not exceed this line when loading special paper.

■

 How to change the paper size

To change the paper size or paper type when paper is loaded into a tray, refer to page 1-19 for details.

■

 Setting envelopes or postcards

When setting envelopes or postcards in the multi purpose drawer, set them in the orientation shown below.

LOADING PAPER

Loading postcards

Load postcards print side up to the rear left of the tray
as shown.

Loading envelopes

Envelopes can only be printed on the address side. Be
sure to place envelopes with the address side up and
the top of the envelope to the rear.

Printing onto envelopes or postcards

●

Attempting to print onto both sides of envelopes or postcards may result in misfeeds or poor prints.

●

Do not use pre-printed envelopes.

●

To avoid wrinkling, misfeeds or poor printing, make sure the postcard stock is not curled.

Содержание DM-3551































































































































































































































































































Отзывы:

Нет отзывов