49
CD-DVD500H
ENGLISH
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Listening to a CD (CDs) (continued)
7
Press the
0
0
0
0
0
button to start playback.
Playback will begin from track 1 on the disc you have selected to play.
After that disc finishes, the next disc will automatically play.
When the last track on the third disc has finished, the CD player will stop
automatically.
When there is no CD in one of the disc 1 - 3 positions, that position will be
skipped and the next CD will be played.
To interrupt playback:
Press the
6/
STILL button on the remote control.
To resume playback from the same point, press the
0
button.
To stop playback:
Press the
■
button.
To remove the CDs:
Whilst in the stop mode, press the
7
OPEN/CLOSE button.
The disc tray will open. Remove the two discs. Then, press the DISC SKIP button to
rotate the disc tray and remove the remaining disc.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
Caution:
Do not place two CDs in one disc position.
Do not push the disc tray whilst it is moving.
Do not turn the disc tray by hand. This may cause malfunctions.
If the power fails whilst the tray is open, wait until the power is restored.
If the disc tray is stopped forcibly, “ER-CD10” or “ER-CD20” will appear in the dis-
play and the unit will not function.
If this occurs, press the ON/STAND-BY button to enter the stand-by mode and then
turn the power on again.
If TV or radio interference occurs during CD operation, move the unit away from the
TV or radio.
If a disc is damaged, dirty, or loaded upside down, the disc will be skipped.
CD playback
–
Listening to a CD (CDs)
–
Starting playback with a desired track
You can play a disc starting with the desired track.
1
Whilst in the stop mode, press one of the
s
s
s
s
s
1 -
s
s
s
s
s
3 buttons or
DISC SKIP button to select the desired disc.
2
Press the
5
5
5
5
5
3
3
3
3
3
PRESET
X
X
X
X
X
or
W
W
W
W
W
PRESET
2 4
2 4
2 4
2 4
2 4
button to select
the desired track and its playback starts automatically.
You can also press the
5
/
3
or
2/4
button on the remote control for
the same operation.
You can also select the desired track by pressing the 0 - 9 buttons, then
press the
0
button on the remote control.
The playback of the selected track is started.
When the last track of the disc with the selected track is finished, the next
disc will be automatically started.
To stop playback:
Press the
■
button.
Notes:
When the DISC SKIP button is pressed during playback, the next disc will begin
automatically.
When one of the
s
1 -
s
3 buttons is pressed during playback, playback of the
selected disc will begin automatically.
Selected disc number
Selected track number
