AR-5618S SIMULATIONS 7-13
43
04
Fusing temperature correction
setting
When the simulation is terminated, the current set value is displayed. When the [%] key is pressed,
the setting is changed. When the [START] key is pressed, the set content is written into the EEPROM
and the machine goes into the sub code input standby mode.
10
Postcard paper feed cycle setting
Used to set the paper feed cycle timing in postcard printing. (Pickup interval)[1] ~ [99]
(Center [50], Unit: 100msec)(Example: When 50, pickup interval = 100msec x 50)
This simulation functions only when the destination is set to Japan AB series.
12
Fusing fan rotating speed setting
when ready state
The rotating speed of the fusing fan is set when the thermister of the fusing unit detects 190°C or
above or when the thermister of the fusing unit detects 190°C or below.
(Only when the machine is in the ready state, the fusing fan rotates at the speed set with this
simulation.)
When this simulation is executed, the current code number is displayed.
When [AUTO/TEXT/PHOTO] key is pressed, the set value for detection of 190°C or above and the
set value for detection of 190°C or below are switched alternatively.
To change the set value for detection of 190°C or above, enter the code number when the AUTO
indicator is lighted.
To change the set value for detection of 190°C or below, enter the code number when the TEXT
indicator is lighted.
When [START] key is pressed after entering the code number, the setting is settled and saved into
the EEPROM and the machine goes into the sub code input standby mode.
13
Fusing paper interval control allow/
inhibit setting
Used to set the paper feed timing of 21st and later page to A3 or WLT when multi copying or printing
paper of narrow width. (A3 or WLT depends on the destination.)
When this simulation is executed, the currently set code number is displayed. Enter a desired code
number and press the [START] key, and the entered code number is written into the EEPROM and
the machine goes into the sub code entry standby mode.
<Applicable paper>
1) Paper tray: A4R, B5R, 8-1/2" X 14", 8-1/2" X 13", 8-1/2" X 11", A5, INV
2) Bypass tray: A4R, B5R, 8-1/2" X 14", 8-1/2" X 13", 8-1/2" X 11", A5, INV,16KR
*
A5 size for bypass tray is valid only for EX Japan AB series.
Main
code
Sub
code
Contents
Details of operation
SIM choice
(exposure mode)
Contents
Default
A
AE mode lamp
Correction temperature when initial JOB (UP)
5
B
TEXT mode lamp
Correction temperature when in the latter half JOB
(DOWN)
-5
C
PHOTO mode lamp
The number of sheets of initial temperature correction.
3
D
AE+TEXT mode lamp A3/WLT
The number of sheets of temperature correction
(In the latter half)
50
E
AE+PHOTO mode
lamp
A4/LT
The number of sheets of temperature correction
(In the latter half)
50
F
TEXT+PHOTO mode
lamp
A3/WLT/A4/LT except
The number of sheets of temperature correction
(In the latter half)
25
LED
Setting mode
Code
number
Setting
AUTO indicator
When 190°C or below is detected
0
Low speed rotation*Default
1
High speed rotation
TEXT indicator
When 190°C or above is detected
0
Low speed rotation
1
High speed rotation*Default
Code number
Setting
0
1
Inhibit * Default
Allow
