AR-5618S SIMULATIONS 7-12
30
01
Paper sensor status display
The paper sensor status is displayed with the lamps on the operation panel.
*
When each sensor detects paper, the corresponding lamp turns on.
42
01
Developing counter clear
The developer counter data in the EEPROM is cleared and 0 is displayed on the 7-seg display.
When the [Interrupt] key is pressed at that time, the machine goes into the sub code input standby
mode. When the [CA] key is pressed, the simulation mode is terminated.
43
01
Fusing temperature setting
(During normal copy)
When the simulation is terminated, the current set value is displayed. When the [%] key is pressed,
the setting is changed. When the [START] key is pressed, the set content is written into the EEPROM
and the machine goes into the sub code input standby mode.
02
Setting of item related to fusing
temperature
When the simulation is terminated, the current set value is displayed. When the [%] key is pressed,
the setting is changed. When the [START] key is pressed, the set content is written into the EEPROM
and the machine goes into the sub code input standby mode.
03
Fusing temperature set value in
preheating
When the simulation is terminated, the current set value is displayed. When the [%] key is pressed,
the setting is changed. When the [START] key is pressed, the set content is written into the EEPROM
and the machine goes into the sub code input standby mode.
Main
code
Sub
code
Contents
Details of operation
LED
Sensor name
Developer replacement required indicator
Misfeed indicator(Copier)
Toner cartridge replacement required indicator
Bypass tray indicator
1st tray indicator
2nd tray indicator
3rd tray indicator
4th tray indicator
Misfeed indicator(1st tray)
Misfeed indicator(2nd tray)
Paper required indicator
Paper exit sensor
Duplex sensor
Paper entry sensor
Bypass tray empty sensor
1st tray paper empty sensor
2nd tray paper empty sensor
3rd tray paper empty sensor
4th tray paper empty sensor
2nd tray paper feed sensor
3rd tray paper feed sensor
4th tray paper feed sensor
SIM choice
(exposure mode)
Contents
Default
A
AE mode lamp
Fusing temperature set value when ready standby.
170
C
TEXT mode lamp
Black and white plain paper fusing temperature set
value.
18/20cpm
model:150
23cpm
model:165
D
PHOTO mode lamp
Heavy paper fusing temperature set value.
180
E
AE+TEXT mode lamp Main motor begins rotation fusing temperature set
value.
100
F
AE+PHOTO mode
lamp
Main motor rotation end time set value.
0
G
TEXT+PHOTO mode
lamp
WARM UP completion time.
23
SIM choice
(exposure mode)
Contents
Default
H
AE mode lamp
ALARM STOP
At shift sub thermister temperature.
230
I
TEXT mode lamp
ALARM STOP
At release sub thermister temperature.
180
J
PHOTO mode lamp
Rotation time after JOB ends (COOL DOWN)
0
SIM choice
(exposure mode)
Contents
Default
N
AE mode lamp
Fusing temperature set value when preheating.
110
Q
TEXT mode lamp
Fusing temperature set value when Warm-UP at 120°C or
below.
160
T
PHOTO mode lamp
Fusing temperature set value when Warm-UP at 120°C
or below.
150
