AR-5618S SIMULATIONS 7-4
05
01
Operation panel display check
<<LED check mode (ALL ON/Individual ON)>>
When the [START] key is pressed in the sub code input mode, all the LED's (including the 7-seg
display) are turned ON. After 5 sec of all ON, the machine goes to the sub code input standby mode.
When the [AUTO/TEXT/PHOTO] key is pressed during all ON, the lighting mode is shifted to the
individual ON mode, where the LED's are individually lighted from the left top, to the left bottom, to
the next line top, to the bottom, and so on. (For the 7-seg display, the 3-digit lamps are lighted at
once.)
After completion of lighting of all the lamps, the mode is shifted to the all ON mode.
After 5 sec of all ON mode, the machine goes to the sub code input standby mode.
When the [Interrupt] key is pressed in the LCD check mode, the machine goes back to the sub code
input standby mode.
When the [CA] key is pressed, the simulation is terminated.
When the [START] key is pressed with all the lamps ON, the machine goes back to the key input
check mode.
<< Key input check mode>>
When the machine goes into the key input check mode, [- - -] is displayed on the copy quantity
display. Every time when a key on the operation panel is pressed, the input value is added on the
copy quantity display.
[- - -]
[ 1]
[ 2]
•••.
When a key is pressed once, it is not counted again.
When the [START] key is pressed, the input number is added and displayed for 3 sec, and the
machine goes into the LED lighting check mode (LED all ON state). When the [Interrupt] key is
pressed for the first time, it is counted. When the key is pressed for the second time, the machine
goes into the sub code input mode. When the [CA] key is pressed for the first time, it is counted.
When the key is pressed for the second time, the simulation is terminated. (Note for the key input
check mode).
•Press the [START] key at the end. (When the key is pressed during the process, the machine goes
into the LED lighting check mode (all ON state).).
•When two or more keys are pressed simultaneously, they are ignored.
02
Fusing lamp and cooling fan
operation check
When the [START] key is pressed, the fusing lamp turns ON for 500ms and OFF for 500ms.
The operation is repeated 5 times. During this process, the cooling fan motor rotates.
After completion of the process, the machine goes into the sub code input standby mode.
03
Copy lamp lighting check
When the [START] key is pressed, the copy lamp lights up for 5 sec. After completion of lighting, the
machine goes into the sub code input mode.
When the [Interrupt] key is pressed, the process is interrupted and the machine goes into the sub
code input standby mode. When the [CA] key is pressed, the simulation is terminated.
06
01
Paper feed solenoid/clutch
operation check
When this simulation is executed, the sub code is displayed on the 7-seg display and the lamp
corresponding to the solenoid/clutch lights up.
Select a solenoid/clutch with the [TRAY SETTING] key (the lamp corresponding to the solenoid/
clutch lights up) and press the [START] key, and the machine repeats operation of ON for 500ms and
OFF for 500ms.
This operation is repeated 20 times.
After that, the machine goes into the sub code entry standby mode.
02
Resist roller solenoid/clutch
operation check
When the [START] key is pressed in the sub code input state, the resist solenoid/clutch (RRS) turns
ON for 500ms and OFF for 500ms. This operation is repeated 20 times.
After completion of the process, the machine goes into the sub code input standby mode.
Main
code
Sub
code
Contents
Details of operation
Individual ON mode cycle:
300ms for ON
20ms for OFF
LED
Solenoid
Main tray indicator
2nd tray indicator
3rd tray indicator
4th tray indicator
Bypass tray indicator
Misfeed indicator(2nd tray)
Misfeed indicator(Copier) & Misfeed
indicator(2nd tray)
1st tray paper feed solenoid/clutch
* 2nd tray paper feed solenoid/clutch
* 3rd tray paper feed solenoid/clutch
* 4th tray paper feed solenoid/clutch
Bypass tray solenoid
* 2nd tray transport solenoid/clutch
* 3rd tray transport solenoid/clutch
1
:
'11/Jul/22
1