Sharp AQUOS Sense, Инструкция по эксплуатации

Страница: 192 / 227

190
Appendix/Index
z Battery life is short
y Make sure the handset is not left for a long time outside the
service area.
Outside the service area, since radio waves are searched to
make communication available, more electric power than
usual is used.
When the handset keeps out of service, turn power off or set
Airplane.
☞
P. 39 “Turning power off/Reboot/Emergency
mode”, P. 152 “More”
y The battery life depends on the usage environment and
deterioration level.
☞
P. 200 “Main specifications”
y
Internal battery is a consumable product. Battery life per
charge is gradually reduced every time the battery is charged.
Contact the number listed in “Repairs” (in Japanese only) on
the last page or a repair counter that DOCOMO specifies if
the battery life becomes extremely shorter than at the time of
purchase even after fully charged.
☞
P. 37 “Internal battery
usable life”
y End apps which are not in use.
y Set wireless functions which are not in use to OFF.
☞
P. 149
“Wi-Fi”, P. 175 “Using Bluetooth function”
y Conserve the battery power by using Energy saving.
☞
P. 146 “Energy saving”
z Not activated by touching or pressing keys
y
Make sure the handset is not turned off.
☞
P. 39 “Turning
power on”
z Screen response is slow when touching or pressing keys
y This may happen when a great deal of data is saved on the
handset, when a large amount of data is being transferred
between the handset and the microSD Card, etc.
☞
P. 147
“Storage”
z
docomo nano UIM card is not recognized
y Is the docomo nano UIM card inserted facing right direction?
☞
P. 32 “docomo nano UIM card”
z
Clock is incorrect
y Clock may become incorrect if the power is left turned on for a
long time. Make sure [Automatic date & time] is enabled and
turn the power on again in a location with good signal
conditions.
☞
P. 168 “Date & time”
z Handset operation is unstable
y
The apps installed on the handset after purchase may become
a cause. If you can improve the symptoms by activating the
handset with the safe mode set, you may be able to improve
the symptoms by uninstalling the installed apps.
※
The safe mode is a function to activate the handset nearly
in the state of default.
y For activating the safe mode
Turn the power on again when the power is turned off, then
keep pressing
2
on the screen during activation until the
lock screen of the touch panel is displayed.
※
Alternatively, 0 while the power is turned on (for at
least 2 seconds)
▶
touch and hold [Power off]
▶
[OK] to
activate the safe mode.
Also, activate the safe mode from Self check.
☞
P. 170
“Self check”