manualshive.com logo in svg

Sharp AL-1661CS, Руководство по обслуживанию

Принтер Sharp AL-1661CS - многофункциональное устройство для печати, копирования и сканирования. Для профессиональной настройки и обслуживания рекомендуется скачать бесплатное руководство по обслуживанию с сайта manualshive.com. Получите сервисный мануал, чтобы легко управлять устройством и решать любые проблемы.

Поделиться
Скачать
background image

AL-1661CS  UNPACKING AND INSTALLATION  5 - 5

10) Check the packages on the screen, and then click the "Start" but-

ton.

The software packages to be installed will be displayed on the
screen. If an incorrect package is  displayed, click the "Back" but-
ton and select the correct packages.

11) The files required for installation of the MFP driver are copied (if

"MFP Driver" was selected).

Follow the on-screen instructions.

Caution: If you are running Windows 2000/XP and a warning message

appears regarding the Windows logo test or digital signature,
be sure to click "Continue Anyway" or "Yes".

When "The installation of the SHARP software is complete"
appears, click the "OK" button.

12) Begin the installation of Button Manager (if "Button Manager" was

selected).

Follow the on-screen instructions.

Click the "Finish" button when the message informs you that setup
is successful.

The Sharpdesk installer will start.

13) Begin the installation of Sharpdesk (if "Sharpdesk" was selected).

Follow the on-screen instructions.

Click the "Finish" button when the message informs you that
Setup is complete.

Caution: In Windows 98/Me/2000, if the following screen appears,

click the "Skip" button or the "Continue" button as appropriate
to continue the Sharpdesk installation.

If "Skip" is selected, the Sharpdesk installation will continue
without installing Sharpdesk Imaging.

If "Continue" is selected, Sharpdesk Imaging will be installed.
If Imaging for Windows is installed on your computer, Sharp-
desk

Imaging will overwrite Imaging for Windows.

14) When the "Finish" screen appears, click the "Close" button.

Caution: If you are running Windows 2000/XP and a warning message

appears regarding the Windows logo test or digital signature,
be sure to click "Continue Anyway" or "Yes".

A message will appear instructing you to connect the machine to
your computer. Click the OK button.

Note:

• If this is a "Standard" installation, the "Finish" screen will appear

after several minutes.

• After the installation, a message prompting you to restart your com-

puter may appear. In this case, click the "Yes" button to restart your
computer.

15) Make sure that the power of the machine is turned on, and then

connect the USB cable.

Windows will detect the machine and a Plug and Play screen will
appear.

Caution: If the following message appears on your computer screen,

close it.

A window regarding "HI-SPEED USB Device" will then
appear. Close the window.

This message appears when the machine's USB 2.0 mode is
not set to "HI-SPEED". For information on switching the USB
2.0 mode.

16) Begin installation of the scanner driver.

"SHARP AL-XXXXCS" will appear in the "Found New Hardware
Wizard" dialog box. Select "Install the software automatically
(Recommended)" and click the "Next" button. Follow the on-
screen instructions.

Caution: If you are running Windows 2000/XP and a warning message

appears regarding the Windows logo test or digital signature,
be sure to click "Continue Anyway" or "Yes".

Note: A "USB 2.0 Composite Device" installation window may appear

prior to this procedure. In this case, follow the instructions in the
window to install the USB 2.0 Composite Device.

17) Begin installation of the printer driver.

"SHARP AL-XXXXCS" will appear in the "Found New Hardware
Wizard" dialog box. Select "Install the software automatically
(Recommended)" and click the "Next" button. Follow the on-
screen instructions.

Caution: If you are running Windows 2000/XP and a warning message

appears regarding the Windows logo test or digital signature,
be sure to click "Continue Anyway" or "Yes".

18) Follow the instructions in the Plug and Play screen that appears in

your version of Windows to begin the installation.

This completes the installation of the software.

• If you installed Button Manager, set up Button Manager as explained

in "SETTING UP BUTTON MANAGER".

(2) Connecting a USB cable

Follow the procedure below to connect the machine to your computer.

A USB cable for connecting the machine to your computer is not
included with the machine. Please purchase the appropriate cable for
your computer.

Caution:

• USB is available with a PC/AT compatible computer that was origi-

nally equipped with USB and had Windows 98, Windows Me, Win-
dows 2000 Professional, Windows XP Professional or Windows XP
Home Edition preinstalled.

• Do not connect the USB cable before installing the MFP driver. The

USB cable should be connected during installation of the MFP
driver.

Содержание AL-1661CS

























































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для AL-1661CS

TDT RX6 Ultrasonic Recording Manual preview
RX6
Бренд: TDT Страницы: 15
Xerox 5700 Series Manual preview
5700 Series
Бренд: Xerox Страницы: 25
VASTEX V-100 Manual preview
V-100
Бренд: VASTEX Страницы: 15
Xerox 4450 Forms Creation Manual preview
4450
Бренд: Xerox Страницы: 108
Canon S 200 User Manual preview
S 200
Бренд: Canon Страницы: 198
Sagem TX 20 Field Maintenance Manual preview
TX 20
Бренд: Sagem Страницы: 86
Oki MPS4700mb Safety Information Manual preview
MPS4700mb
Бренд: Oki Страницы: 40
Ricoh Aficio 2238C Operating Instructions Manual preview
Aficio 2238C
Бренд: Ricoh Страницы: 126
FARGO electronics Pro-LX Pro-LX Laminating Card... User Manual preview
Pro-LX Pro-LX Laminating Card...
Бренд: FARGO electronics Страницы: 228
U-Line ZEBRA ZD410 Manual preview
ZEBRA ZD410
Бренд: U-Line Страницы: 18
Pantum M6503 Series User Manual preview
M6503 Series
Бренд: Pantum Страницы: 155
Xante SpeedSetter 300 Supplementary Manual preview
SpeedSetter 300
Бренд: Xante Страницы: 1
Oki C7400 Maintenance Manual preview
C7400
Бренд: Oki Страницы: 174
Konica Minolta MS6000 MKII User Manual preview
MS6000 MKII
Бренд: Konica Minolta Страницы: 102
GeBe GPT-4454 User Manual preview
GPT-4454
Бренд: GeBe Страницы: 25
BT PaperJet 65E User Manual preview
PaperJet 65E
Бренд: BT Страницы: 64
Canon MB5450 Series Online Manual preview
MB5450 Series
Бренд: Canon Страницы: 1384
Canon LBP352 User Manual preview
LBP352
Бренд: Canon Страницы: 642

Бренды по названию

Популярные бренды

Загрузить еще бренды