Sharp AL-1633 Скачать руководство пользователя страница 65

Страница: 65 / 84

TROUBLESHOOTING

Remove the new drum cartridge from
the protective bag and gently insert
the lead end of the drum cartridge
along the guides.

Remove the protective cover from the
drum cartridge and then push the
cartridge all the way into the machine.

Insert the TD cartridge along the
guides until it locks in place.

If there is any dirt or dust
on the TD cartridge,
remove it before
installing the cartridge.

Close the front cover and side cover.

The drum cartridge
replacement required
indicator (

) will go

out.

Do not touch the drum cartridge (green
portion). Doing so may damage the drum and
cause smudges on copies.

• Before closing the front cover, make sure

that the TD cartridge and drum cartridge is
correctly installed.

• When closing the front cover, gently hold

both ends.

Caution

Note

!Chapter5.fm 63

ページ

２００４年３月２６日　金曜日　午前１１時３３分

Содержание AL-1633





















































































Результаты поиска

Содержание AL-1633

Отзывы:

Похожие инструкции для AL-1633

Бренды по названию

Популярные бренды

Sharp AL-1633, Руководство по эксплуатации

Результаты поиска

Содержание AL-1633

Отзывы:

Похожие инструкции для AL-1633

Бренды по названию

Популярные бренды