Sharp AL-1633, Руководство по эксплуатации

Страница: 38 / 84

36
4
Chapter 4
USER SETTINGS
This chapter explains how to set the automatic exposure level, toner save mode, and the user programs, which are
custom settings that control fine points of the machine’s operation.
ADJUSTING THE AUTOMATIC
EXPOSURE LEVEL
The exposure level used in automatic exposure adjustment, which automatically adjusts the copy exposure
according to the original, can be adjusted. If copies tend to be too dark or too light when automatic exposure
adjustment is used, follow the steps below to adjust the automatic exposure level.
The automatic exposure level can be adjusted separately for the document glass and the SPF.
1
To adjust the automatic exposure
level in the SPF, place the original in
the SPF. (p.22)
Make sure that the SPF indicator is lit.
2
Press the [AUTO/TEXT/PHOTO] key
( / / ) to select "PHOTO"
( ).
3
Hold down the [AUTO/TEXT/PHOTO]
key (
/ / ) until the AUTO
indicator ( ) blinks.
The exposure level
indicators show the
current setting.
4
Press the [Light] key ( ) or [Dark]
key ( ) to lighten or darken the
automatic exposure level as desired.
5
Press the [AUTO/TEXT/PHOTO] key
( / / ) to complete the
setting.
The AUTO indicator ( ) stops blinking and
lights steadily.
The copy, scanner and printer functions cannot be used while the automatic exposure level is being adjusted.
Note
To adjust the automatic exposure level for
copies made from originals placed on the
document glass, proceed to step 2.
Note
AUTO
AUTO
AUTO
AUTO
1 3 5
After adjusting the automatic exposure level,
it is recommended that you make a test copy
to check the new level.
1 3 5 1 3 5
AUTO
AUTO
Note
AL-1633_1644_EX.book 36 ページ ２００３年１０月２３日 木曜日 午後８時２１分