Care and Maintenance
1.
Poignée supérieure
2.
Poignée inférieure
3.
Prise de chargement
4.
Contrôleur de vitesse
5. Témoins
de
chargement/vitesse
6. Électrobrosse balayeuse
7. Boîtier
de
vitesse
8.
Outil à angle
Modèle : V1730A
7,2 volts CC
9.
Brosse rotative
10. Couvercle de la brosse
11. Phare
12. Coupelle à poussière
13. Adaptateur de chargement
14. Bouton de mise en marche
15. Tube de rallonge
16. Tube télescopique
To improve the performance and life of your unit, we recommend you do the
following:
1. Once a month clean the unit with a dry cloth, including the chamber which the
dust container fits into. Remove any hair, fiber or other materials that may have
built up in the chamber, on the rotating brush or edging tool.
2. Don’t use abrasive materials to clean the sweeper.
Do not immerse the unit in
water.
3. Do not pick up liquids or use on wet floors.
4. Do not use on concrete, tar or similar rough surfaces .
5. Don’t pick up pieces of string or fabrics with the sweeper.
6. Do not clean tasseled or frayed carpets with the sweeper.
TROUBLESHOOTING GUIDE
PROBLEM
POSSIBLE REASON
POSSIBLE SOLUTION
SWEEPER WILL NOT
OPERATE
1. Batteries
discharged.
2. No power in electrical
outlet supplying charging
adapter.
3. Unit needs servicing.
1. Charge
unit.
2. Check
fuse
or
breaker.
Replace fuse/reset breaker.
3. Call Customer Service.
SWEEPER WILL NOT
PICK-UP
1. Dust container is full.
2. Unit needs recharging.
1. Empty dust container.
2. Charge
unit.
DUST ESCAPING
FROM SWEEPER
1. Dust container is full.
1. Empty dust container.
ROTATING BRUSH
WILL NOT PICK UP
1. Unit
clogged.
2. Dust container is full.
1. Check
for
excessive
material
on brush or in bottom of
sweeper. Remove obstruction
from brushes and/or sweeper.
2. Empty and clean dust
container.
SWEEPER WILL NOT
CHARGE
1. Electrical outlet not
working
2. Charging
Adapter
not
working
3. Batteries no longer
functioning
1. Check to ensure outlet is
working properly. (Easily
checked by plugging in
another appliance.
2. Replace
charging
adapter
3. See battery disposal pg. 8.
Les illustrations peuvent différer du produit lui-même.
REMARQUE: Les piles de la balayeuse sans fil de modèle
V1730A ne sont pas chargées avant sa sortie
d’usine. L’appareil doit être chargé pendant 20
heures avant la première utilisation. N’utilisez que
les piles de rechange
XBP615
.
9
22