background image

sharkclean .com

sharkclean .com

NOTE:

 All accessories are compatible with both the wand and the handle.

WHOLE-HOME CLEANING

CLEANING MODES

To engage brushrolls, turn power on, then 

place foot on floor nozzle and tilt handle back.

WHAT DOES THE BRUSHROLL  

INDICATOR LIGHT MEAN?
Solid Green: 

The brushroll and Soft Roller are 

spinning and working properly.

Solid Red: 

There is a jam in the brushroll area. Turn 

your vacuum off and remove any blockages in the 

nozzle.

Flashing Red: 

The motorized floor nozzle is 

overheating. Turn off your vacuum and wait for it to 

cool down. After vacuum has cooled, move surface 

selector switch to Carpet setting, then press the 

selector button to turn vacuum back on.

Press the 

Wand Release 

button to detach the 

wand from the pod.

For Carpet cleaning, press the button and it will 

illuminate in green. The brushrolls will spin faster.

NOTE:

 The brushrolls will not spin unless the wand is reclined.

If the light is illuminated, the vacuum is in Carpet 

mode. To clean hard floors, press the selector 

button to switch to Hard Floor mode. When the 

light is NOT illuminated, the vacuum is in Hard 

Floor mode, and the brushrolls will spin slower. 

NOTE:

 The brushrolls will not spin unless the wand is reclined.

Suction Control Collar

 offers variable suction 

based on your needs. Slide to 

MIN

 to reduce 

suction and increase maneuverability on carpets. 

Slide to 

MAX

 to increase suction on bare floors.

Detach wand from pod (see above). Press the 

Lift-Away 

button to detach the pod from the 

floor nozzle.

Press the 

Handle Release Latch

 to detach the 

handle from the wand.

Detach wand from pod, then detach the 

handle from the wand (see above). Press the 

Lift-Away 

button to detach the pod from the 

floor nozzle.

UPRIGHT

HARD FLOOR

ABOVE-FLOOR—HANDLE

LIFT-AWAY®—HANDLE

ABOVE-FLOOR—WAND

CARPET

LIFT-AWAY®—WAND

WHOLE-HOME CLEANING

SETTINGS

SUCTION CONTROL

BRUSHROLL INDICATOR LIGHT

NOTE: 

For deep cleaning per ASTM F 608 (embedded dirt in carpets) please set to 

Carpet

NOTE:

 For particularly 

stubborn stuck-on dust messes on hard floors, set to 

Carpet

.

Содержание Lift-Away ZU780 Series










Отзывы: