sharkclean .com
sharkclean .com
EMPTYING THE DUST CUP
To remove
Dust Cup
, slide up the buttons on the
sides of the handle. Tilt dust cup, then lift
to remove.
To reinstall, place bottom of dust cup into
pod and then tilt until it clicks into place.
To empty debris, press lower release button
and bottom of dust cup will drop open.
To remove collected debris from
Lint Screen
,
press top release button and lift handle to
open. Gently brush lint screen to clean.
CLEAN HEPA FILTER
EVERY YEAR
Press
Filter Access
button at bottom of
Filter Cover
. Tilt cover and lift out. Remove
HEPA Filter
.
To reinstall, insert HEPA filter into unit and
replace the cover.
CLEAN PRE-MOTOR FILTERS
EVERY 3 MONTHS
Remove
Dust Cup
, then lift out
Filters
.
Regularly clean and replace your filters to keep your vacuum's suction power optimal.
To clean filters, rinse with cold water
ONLY
to prevent damage from cleaning chemicals. Allow
all filters to air-dry for at least 24 hours before reinstalling them to prevent liquid from being
drawn into electric parts.
CLEANING AND REPLACING THE FILTERS
CLEANING FILTERS
IMPORTANT:
DO NOT
use soap when cleaning the filters.
IMPORTANT:
Unplug the power cord before performing any maintenance.
Filter
Cover
