sharkclean .com
sharkclean .com
CLEANING SENSORS AND CHARGING CONTACTS
CLEANING SIDE BRUSHES
MAINTENANCE
Carefully unwind and remove any string or hair
wrapped around brushes.
Gently wipe brushes with a dry cloth. To reinstall,
snap the brushes over the pegs. Spin the brushes
manually to make sure they are installed correctly.
CLEAN SENSORS AND CHARGING CONTACTS AS NEEDED.
With a dry cloth, gently dust off the sensors
and contacts located on the bottom of the robot and on the dock.
NOTE:
Remove and replace any side brushes that are bent or damaged. To remove a brush, lift it off its peg.
IMPORTANT:
The robot uses cliff sensors to avoid stairs and other steep drops. Sensors may work less effectively when
they are dirty. For best results, clean sensors regularly.
CLEAN SIDE BRUSHES AS NEEDED.
CLEANING THE WHEELS
MAINTENANCE
CLEAN FRONT WHEEL HOUSING PERIODICALLY.
See sharkaccessories.com for replacement parts.
Rotate the front wheel while lightly brushing away
dirt and debris. Clean the wheel and the housing
around it.
Periodically clean the drive wheels and the housing
around them. To clean, rotate each drive wheel
while dusting.
NOTE:
Brush not included.
