Sharebot Next Generation XXL+
user's manual
In the configuration file we have setted all the parameters to allow you a well experimented point of start that allows you print almost everything. If you want to create
different profiles you can change individual parameters and save configurations with a new name. We suggest you do not overwrite the profiles developed by Sharebot
and to check for new profiles releases on our social network – website.
Import the STL to print
In the "Plater" tab click "Add" to import your 3D model with STL extension, or you can just drag and drop it inside the software window. Slic3r puts the model in the center
of the printing area, laying it on the printing plate: but is strongly recommended to export the STL laid on the XY plane already oriented as we want to print it.
You can upload multiple STL or upload several times the same STL. For the first prints we recommend you try one file at a time. Generally print one object at time
increases the print quality of the printed part.
Sharebot srl
Nibionno Italy
All rights reserved
. No part of this manual
may be reproduced or transmitted in any form or by any means without prior permission
page 29