Sharebot Next Generation XXL+
user's manual
As advice, avoid using price as an element to make strength (pulling) or lever (folding) it could break. If now you still can't detach the part, you can put the glass
plate under water (warm is better), thus enabling the dissolution of the hairspray and a facilitated detachment of the printed piece.
Remember that when printing is just completed, you may have the printing plate and certainly the extruder at high temperatures. The nozzle remains for several minutes
at a temperature such as to cause a burn; check its temperature on lcd screen and absolutely avoid any contact with it if the indicated value is above 50 degrees. If in
doubt, do not take out the glass until the temperature decreased to safe levels before you put your hands inside the print.
Sharebot srl
Nibionno Italy
All rights reserved
. No part of this manual
may be reproduced or transmitted in any form or by any means without prior permission
page 27