PILOT 2000 USER GUIDE
Programming
To program a Preset:
1. Select a
Memory
2. Press
Preset
button;
3. Press a button 1-20 (21-40) of the MFK according to the preset to be created
4. Press
Edi
t key (red LED on the Edit button and the green LED of the MFK preset will
blink)
5. Rise the fader below the display to set the desired value to the dimming channels. In
case of more than 6 channels, use the scroll button (located on the right of the display)
to set other channels.
6. Press
Edit
key
7. Press
Enter
key
8. Your
Preset
is now stored
To program a Psycho:
1.Select a
Memory
2.Press
Psycho
button
3.Press a button 1-20 (21-40) of the MFK according to the psycho to be created
4.Press
Edit
key (red LED on the Edit button and the green LED of the MFK psycho will
blink)
5.Select the sound frequency band where you want your dimming channels to work.
The first 4 buttons (from left to right) identify the four bands
6.Rise the fader below the display to set the desired value for each dimming channel
7.Press
Edit
key
8.Press
Enter
key
9.Your
Psycho
is now stored
To edit a Chase:
1. Select a
Memory
2. Press
Chase
key
3. Press a button 1-20 (21-40) of the MFK according to the program to be created
4. Press
Edit
Key
5. Press
right arrow
of the scroll buttons (located on the right of the display)
6. Select
Edit Step
from the edit menu
7. Press
right arrow
of the scroll buttons
8. Rise the fader below the display to set the desired value for each channel
9. Press and hold down the
Store
key
10. At the same time push the MFK button corresponding to the step to be stored
11. Repeat from the above item 7 till the last step is programmed
12. Push the
left arrow
until the display shows the program number and the Length of the
steps
13. Press
Edit
button
14. Press
Enter
button
15. Now your Chase is stored
14
SGM A/S · Ver. 2.03