PILOT 2000 USER GUIDE
Patching
Total Dimmer Channels
This function allows operators to decide how many DMX channels must be assigned to the
dimmer channels.
Pilot 2000 can control a minimum of 6 channels up to 192 channels, divided into 32 pages
on the display. To avoid patch conflict, set the Total Dimmer Channels before to patch the
Extra channels and Unit channels.
1. Press the
Setup
button.
2. Scroll with the up/down arrows until
“Total dimmer channels”
appears on the display.
3. Press the right-hand Scroll button .
4. Only
“N. Pages”
field can be modified by using the UP/DOWN arrows while the
“Channels”
field will show how many dimming channels can be used according to the
value inserted into the
“N.Pages”
field.
5. Press
Setup
button to store the settings and leave
Total Dimmer Channels Menu.
Patching Dimming Channels
WARNING!
To avoid patching conflict, don’t let the
Dimming channels
to overlap the
Unit Channels
or the
Extra Channels
1. Press the
Setup
button.
2. Scroll with the up/down arrows until
“Dimmer Patch”
appears on the display.
3. Press the right-hand Scroll button .
4. Press the UP/DOWN button to set in the
“DMX-CH”
field, the DMX channel to be
patched to the board’s control channel
5. Using the Left/Right arrows, move below the
“Channel”
field and set the board’s
control channel to be linked to the DMX channel
6. Using the Left/Right arrows, move below the
“Lim%”
field and set the
limiter value
to
be applied to the control channel
7. Using the Left/Right arrows, move below the
“Equal”
field and set the
equalization
curve
to be applied to the control channel
8. Press
Setup
button to store the settings and leave
Dimmer Patch Menu
SGM A/S · Ver. 2.03
11