SGM IDEA SPOT 700, Руководство пользователя

Страница: 26 / 30

SGM
GB
XM473-V1.0-NR Idea Spot 700
２４
ERROR MESSAGE
When you turn on the fixture, it will make a reset first. The display may show “XXer” while there are
problems with one or more channels. “XX” stands for channel 1, 2, 3, 4, 5, 6, 8, 9, 10, 11, 12, 13, 14, 17,
18 who has the testing sensor for positioning.
For example, when the display shows “Cyan color Er”, it means there is some error in channel 1. If there are
some errors on channel 1, channel 3, channel 6 at the same time, you may see the error message “Pan
movement Er”, “TILT Movement Er ”, “Color Wheel Er” flash repeated for 5 times, and then the fixture will
generate a reset signal, all the stepper reset. If the fixture remain error message after performing reset
more than 3 times, it will detect whether the fixture has more than 3 errors. If the fixture has more than
3 errors (including 3 errors), all the channels can not work properly; but if the fixture has less than 3 errors,
only the channels which have errors can not work properly, others can work as usual.
PAN- movement Er
(PAN-yoke movement error) This message will appear after the reset of the fixture if the yoke’s
magnetic-indexing circuit malfunction (sensor failed or magnet missing) or the stepping-motor is defective
(or its driving IC on the main PCB). The PAN-
movement is not located in the default position after the
reset.
TILT- movement Er
(TILT-head movement error) This message will appear after the reset of the fixture if the head’s
magnetic-indexing circuit malfunctions (sensor failed or magnet missing) or the stepping-motor is
defective (or its driving IC on the main PCB). The TILT-
movement is not located in the default position after
the reset.
Gobo wheel 1 Er
(Gobo wheel 1 - error) This message will appear after the reset of the fixture if the magnetic-indexing
circuit malfunction (sensor failed or magnet missing) or the stepping-motor is defective (or its driving IC on
the main PCB). The Gobo wheel 1 is not located in the default position after the reset.
Gobo Rot 1 Er
(Gobo Rot 1- error) This message will appear after the reset of the fixture if the magnetic-indexing circuit
malfunction (sensor failed or magnet missing) or the stepping-motor is defective (or its driving IC on the
main PCB). The Gobo Rot 1 is not located in the default position after the reset.
Gobo wheel 2 Er
(Gobo wheel 2 - error) This message will appear after the reset of the fixture if the magnetic-indexing
circuit malfunction (sensor failed or magnet missing) or the stepping-motor is defective (or its driving IC on
the main PCB). The Gobo wheel 2 is not located in the default position after the reset.
Gobo Rot 2 Er
(Gobo Rot 2- error) This message will appear after the reset of the fixture if the magnetic-indexing circuit
malfunction (sensor failed or magnet missing) or the stepping-motor is defective (or its driving IC on the
main PCB). The Gobo Rot 2 is not located in the default position after the reset.
Cyan Color wheel Er
(Cyan color wheel- error) This message will appear after the reset of the fixture if the magnetic-indexing
circuit malfunction (sensor failed or magnet missing) or the stepping-motor is defective (or its driving IC on
the main PCB). The cyan color wheel is not located in the default position after the reset.
Magenta color wheel Er
(Magenta color wheel- error) This message will appear after the reset of the fixture if the
magnetic-indexing circuit malfunction (sensor failed or magnet missing) or the stepping-motor is defective
(or its driving IC on the main PCB). The magenta color wheel is not located in the default position after the
reset.
Yellow color wheel Er
(Yellow color wheel- error) This message will appear after the reset of the fixture if the magnetic-indexing
circuit malfunction (sensor failed or magnet missing) or the stepping-motor is defective (or its driving IC on
the main PCB). The Yellow color wheel is not located in the default position after the reset.
Color wheel Er
(Color wheel- error) This message will appear after the reset of the fixture if the magnetic-indexing circuit
malfunction (sensor failed or magnet missing) or the stepping-motor is defective (or its driving IC on the
main PCB). The color wheel is not located in the default position after the reset.