SGM IDEA SPOT 700, Руководство пользователя

Страница: 19 / 30

GB
SGM
Idea Spot 700 XM473-V1.0-NR
１７
to). When you call up the scenes at your controller, they will automatically be transmitted to the moving
head.
Excursion:
A Master unit can send up to 3 different data groups to the Slave units, i.e. a Master unit can start 3
different Slave units, which run 3 different programs. The Master unit sends the 3 program parts in a
continuous loop.
The Slave unit receives data from the Master unit according to the group which the Slave unit was assigned
to. If e.g. a Slave unit is set to “Slave 1” in the menu “Set to Slave”, the Master unit sends “Auto Program
Part 1” to the Slave unit. If set to “Slave 2”, the Slave unit receives “Auto Program Part 2”.
To start a Auto Program please proceed as follows:
1. Slave-Setting
Select “Function Mode” by turning the encoder.
Press the Enter button to confirm.
Select “Set to slave” by turning the encoder.
Press the Enter button to confirm.
Turn the encoder to select “Slave 1”, “Slave 2” or “Slave 3”.
Press the Enter button to confirm.
Press the Mode/Esc button in order to return to the main menu.
2. Automatic Program Run
Select “Function Mode” by turning the encoder.
Press the Enter button to confirm.
Select “Auto Program” by turning the encoder.
Press the Enter button to confirm.
Turn the encoder to select “Master” or “Alone”. The selection "Alone" means Stand Alone-mode and
"Master" that the device is defined as master.
Press the Enter button to confirm.
Press the Mode/Esc button in order to return to the main menu.
3. Program selection for Auto Pro Part
Select “Edit program” by turning the encoder.
Press the Enter button to confirm.
Select “Select programs” by turning the encoder.
Press the Enter button to confirm.
Turn the encoder to select “Auto Pro Part 1”, “Auto Pro Part 2” or “Auto Pro Part 3”, and thus select
which Slave program is to be sent. Selection “Part 1” means, that the Slave unit runs the same program
as the master units.
Press the Enter button to confirm.
Press the Mode/Esc button in order to return to the main menu.
4. Program selection for Edit Program
Select “Edit program” by turning the encoder.
Press the Enter button to confirm.
Select “Edit program” by turning the encoder.
Press the Enter button to confirm.
Turn the encoder to select the desired program. With this function you can edit specific scenes into a
specific program.
Press the Enter button to confirm.
Press the Mode/Esc button in order to return to the main menu.