Page 20 of 36
www.sgm-lektra.com
FLOWMETER -
configuration
8.4.2 - SET FLOWRATE
Position the cursor on SET FLOWRATE, press ENTER to confirm.
Press SCROLL button to select the instantaneous flow rate measure unit
to be programmed.
Press ENTER to confirm. LEFT ARROW to exit without changes.
DISPLAY VALUES
SET FLOWRATE
LCD CONTRAST
WELCOME TEXT
►
l/sec
l/min
l/h
m³/sec
m³/min
m³/h
►
8.4.3 - LCD CONTRAST
Position the cursor on LCD CONTRAST, press ENTER to confirm.
it’s possible to adjust the contrast of LCD, simply increasing or decreasing the
value of a parameter from 0 to 63.
Use UP ARROW and SCROLL to modify the value.
Press ENTER to confirm. LEFT ARROW to exit without changes.
Default value: 16
DISPLAY VALUES
SET FLOWRATE
LCD CONTRAST
WELCOME TEXT
►
32
LCD CONTRAST
8.4.4 - WELCOME TEXT
Position the cursor on WELCOME TEXT, press ENTER to confirm
It’s possible to edit or delete the message that is displayed by the
FLOWMETER during the ignition phase.
Use UP ARROW (up scroll) and SCROLL (down scroll) to change the digit;
ENTER to move the digit to the right. To confirm press ENTER repeatedly until
leave the parameter. LEFT ARROW to exit without changes
Default value: SGM-LEKTRA FLOWMETER
DISPLAY VALUES
SET FLOWRATE
LCD CONTRAST
WELCOME TEXT
►
SGM-LEKTRA
FLOWMETER
WELCOME TEXT
