SF TECH Neoprene Classic, Руководство пользователя

Страница: 7 / 40

7
ENGLISH
4. ZIPPER
SF Tech drysuit are equipped with a metal YKK Proseal® Zipper. The waterproof zipper provides a
watertight fastener for the drysuit. It is a fragile yet essential part of the suit and should be treated
with the utmost care. The larger teeth visible on the outside of the zipper are clamps that secure
the smaller teeth, visible on the inside surface of the zipper. It is these smaller teeth that interlock
and create firm even pressure on the polymer zipper tape, creating the seal. The outer teeth must
be lubricated and the overall fastener must be clean and free of dirt. Proper maintenance of the
fastener will ensure a good seal and a long service life.
USAGE
Taking care of the zipper is a simple but necessary task to perform. Apply paraffin as lubricant
before each dive. Apply paraffin when the zipper is open, and only on the outside teeth. NEVER use
silicone-based lubricant. Before operating the zipper, ensure it is clean and free of any objects
(sand, mud, etc.) that may result in poor tightness or damage the zipper.
When donning or doffing the drysuit, the zipper MUST BE COMPLETELY OPEN .
Donning or doffing a suit with a zipper partially open will damage the side tape and
the zipper will break. When opening or closing, always ensure that the pulling direction
is along the line of the metal teeth and that both sides of the zipper are parallel. It is
very important to avoid catching undergarments in the teeth. If the slider should jam when closing,
DO NOT FORCE IT. Pull back the slider, remove the obstruction and slowly attempt to close it
again. Excessive force will break the metal chain and destroy the fastener. Avoid bending the zipper
excessively as this will eventually cause the metal chain to break
STORAGE AND MAINTENANCE
After using the zipper, it should be rinsed with clean fresh water. Any objects (sand, mud, etc.) found
in or outside of the teeth before operating the zipper may result in poor tightness or may damage
the zipper. When the zipper tape starts to fray, carefully burn the strings to avoid them being caught
in the zipper.
Store the zipper in a cool dry place and avoid direct sunlight. Store the zipper
COMPLETELY
OPEN , taking care not to bend it. Storage of the zipper in a closed position for a long period will
cause malformation of the sealing areas. Also, storing partially opened will cause zipper bending. If
these effects occur, slight leaks may result. Do not place any heavy object on the zipper.
Do not dry clean, machine wash or iron.