SF TECH Neoprene Classic, Руководство пользователя

Страница: 10 / 40

10
ENGLISH
‹ Starting with the left arm first, grab the wrist of the undergarment and slip the arm into the sleeve.
Let go the undergarment when reaching the wrist seal. Gently push your hand through the wrist
seal. Make sure the undergarments are not caught between the seal and the wrist or it will leak.
Pull the shoulder of the suit all the way to the neck.
‹ Repeat with the right arm .
‹ To put the neck seal, insert both hands in the head opening, finger in, thumbs out, and grab the
collar of the suit. Spread the neck seal wide open, bend your head forward and pull the drysuit
over your head. Be careful not to use your fingernails against the latex or smooth skin neoprene
as it may damage it. For a neoprene neck seal, fold it around 4cm toward the inside to have the
smooth surface against the skin.
‹ Optional: Connect the heating system
‹ To close the zipper, grab both side of the zipper at chest level, lift them up, pull forward then down
in order to move the top rubber stop of the zipper closer to the chest.
‹ Grab the slider loop and pull it down in a direction parallel to the zipper chain. Only minimal
amount of force should be required to close the waterproof zipper. Make sure to not catch any
fabric or foreign object in the zipper as it may damage the teeth.
‹ Fold the telescopic torso to avoid any fold on the zipper.
‹ Adjust and clip the crotch strap.
‹ Close the slider of the zipper flush against the rubber stop.
‹ If the drysuit has a protective zipper, close it the same way.