TECHNICAL MANUAL
When the panel buttons are disabled, none of them are usable when the
printer cover is closed.
In this printer, the panel buttons are the FEED button.
In the macro ready mode, the FEED button are enabled regardless of the
settings of this command; however, the paper cannot be fed by using
these buttons.
ESC d
n
[Name]
Print and feed
n lines
[Format]
ASCII
ESC
d
n
Hex
1B
64
n
Decimal 27
100
n
[Range]
0≤
n ≤ 255
[Description]
ESC d
n prints the data in the print buffer and feeds n lines.
The amount of paper fed per line is based on the value set using the line
spacing command.
The default setting of the paper feed amount is 1/6 inch.
[Notes]
This command sets the print starting position to the beginning of the line.
This command does not affect the line spacing set by
“
ESC 2
”
or
“
ESC 3
”
.
The maximum paper feed amount is 40 inches. If the paper feed amount
(
n x line spacing) of more than 40 inches is specified, the printer feeds
the paper only 40 inches.
[Reference]
ESC 2, ESC 3
ESC p m t1 t2
[Name]
Generate pulse
[Format]
ASCII
ESC
p
m
t1
t2
Hex
1B
70
m
t1
t2
Decimal 27
112
m
t1
t2
[Range]
m = 0, 1 , 48, 49
0≤
t1 ≤ 255 0≤ t2 ≤ 255
TITLE : WTP-100
Page48
