TECHNICAL MANUAL
[Notes]
When the command is input in standard mode, the printer executes only
internal flag operation. This command does not affect printing in standard
mode.
This command sets yhe position where data is buffered within the printing
area set by ESC W.
Parameters for horizontal or vertical motion units (x or y) differ as follow,
depending on the starting position of the printing area:
If the starting position is the upper left or lower right of the printing area,
data is buffered in the direction perpendicular to the paper feed direction.
Commands using horizontal motion units: ESC SP, ESC $, ESC ＼
Commands using vertical motion units: ESC 3, ESC J, GS $, GS ＼
If the starting position is the upper right or lower left of the printing area,
data is buffered in the paper feed direction:
Commands using horizontal motion units: ESC 3, ESC J, GS $, GS ＼
Commands using vertical motion units: ESC SP, ESC $, ESC ＼
[Default]
n = 0
[Reference] ESC $, ESC L, ESC W, GS $, GS P
ESC V
n
[Name]
Turn 90
°
clockwise rotation mode on/off
[Format]
ASCII
ESC
V
n
Hex
1B
56
n
Decimal 27
86
n
[Range]
0≤
n ≤ 1,48≤ n ≤ 49
[Description]
Turns 90
°
clockwise rotation mode on or off.
When
°
CW rotated characters are set.
n = 1 or 49, 90
When
°
CW rotated characters are canceled.
n = 0 or 48, 90
[Notes]
When underline mode is turned on, the printer does not underline 90
°
clockwise-rotated characters.
Double-width and double-height commands in 90
°
rotation mode enlarge
characters in the opposite directions from double height and double-width
commands in normal mode.
This command is input in page mode, the printer performs only internal
flag operations.
[Default]
n = 0
TITLE : WTP-100
Page42
