TECHNICAL MANUAL
[Notes]
This command is effective only in page mode.
Data buffered in page mode and the printable area developed in page
mode are cleared.
This command is switches the setting for the following command (in
which the values can be set independently in standard mode and page
mode) to those for standard mode:
① Set right-side character spacing: ESC SP
② Select 1/6-inch line spacing: ESC 2
③ Set line spacing: ESC 3
Setting for the following commands are effective only in standard mode:
① Select print direction in page mode: ESC T
② Set printing area in page mode: ESC W
[Reference]
FF, ESC FF, ESC L
ESC T
n
[Name]
Select print direction in page mode
[Format]
ASCII
ESC
T
n
Hex
1B
54
n
Decimal 27
84
n
[Range]
0≤
n ≤ 3, 48≤ n ≤ 51
[Description]
Select the print direction and starting position in page mode.
n specifies the print direction and starting position as follows:
N
Print Direction
Starting Position
0, (48)
Left to right
Upper left(A in the figure)
1, (49)
Bottom to top
Lower left(B in the figure)
2, (50)
Right to left
Lower right(C in the figure)
3, (51)
Top to bottom
Upper right(D in the figure)
A D
Printing Paper feed direction
area
B C
TITLE : WTP-100
Page41
